What does C0035 mean on a Dodge?

On Dodge vehicles, the C0035 code indicates: ABS module lost signal from left front wheel speed sensor or detected out-of-range values.

Is it safe to drive my Dodge with a C0035?

No, it is NOT safe. This is a critical issue that could cause engine damage to your Dodge.

C0035

Dodge Left Front Wheel Speed Sensor Circuit

Specialized diagnostic report for Dodge owners dealing with the C0035 fault code.

Technician's Overview

🔴 CRITICAL — STOP DRIVING

ABS module lost signal from left front wheel speed sensor or detected out-of-range values. When this code is triggered in a Dodge, the engine control module (ECM) has detected an issue with the ABS / Traction Control system.

Common Symptoms

ABS warning light on in my Dodge
Traction control disabled in my Dodge
Stability control offline (VSC / ESC / EBCM warning) in my Dodge
ABS activates during normal stops in my Dodge

Probable Causes

Wheel speed sensor air gap too large — sensor pulled by bearing play
Chafed or torn wiring harness to left front sensor
Failed wheel speed sensor (open or shorted internally)
Tone ring / reluctor ring damaged or cracked (integrated into wheel hub bearing)

Recommended Fixes for Dodge

Raise vehicle, spin wheel by hand, watch live data — sensor dropout confirms bad sensor or wiring
Inspect wire harness from sensor to ABS module; look for chafe points on steering knuckle
Check sensor gap — spec typically 0.020–0.050". Replace hub bearing if gap is excessive or tone ring damaged
Replace wheel speed sensor ($15–45 DIY) or full hub/bearing assembly if tone ring is integral

QUICK FIX TOOL

Best Scanner for Dodge Vehicles

To accurately diagnose the C0035 on your Dodge, we recommend the BlueDriver Bluetooth scanner. It provides specific fix suggestions from a database of millions of confirmed repairs.

Buy on Amazon →